400-188-7028
English
PRODUCT DETAIL 
Home / Products List / Adhesives / Structural Adhesive / Fenloc JY-312 All Materials Usable Easy-to-use AB Acrylic Adhesive

Fenloc JY-312 All Materials Usable Easy-to-use AB Acrylic Adhesive

Share to:

The two-part system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature. A full cure is reached in 15-24 hours.

  • JY312
  • 佳远
80:
Quantity:

Automotive

Brick

Concrete

Fiberglass

Metal & More


·Prepare

Clean surface area of dirt, grease, oil, paint or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.

·Mix

After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.

·Apply

Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.

·Dry

Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (minimum) before putting object back in use.


Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8° to 28°C (46° to 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container.