400-188-7028
English
PRODUCT DETAIL 
Home / Products List / Industrial Sealants / RTV Silicone Gasket Maker / D86 high performance Blue RTV Silicone Gasket Maker

D86 high performance Blue RTV Silicone Gasket Maker

Share to:
D86 will not foul oxygen sensors. Replaces almost any cut gasket. Makes reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating. Coats pre-cut gaskets to increase reliability. Temperature range -65°F to 500°F (-54°C to 260°C) intermittent; resists auto and shop fluids.
  • D86
  • 佳远
55/100:
Quantity:

·Good resistance to oil and joint movement

·Can be supplied in cartridges, tubes or rocep cans

·For use with flexible flanges

·Reduces migration of liquid after application


·Automobile: Valve covers, oil pans, timing covers, water pumps, and thermostat housings.

·Marine:  water pumps, thermostat housings


·Make sure that surfaces to be sealed are clean and oil free.

·Apply a continuous bead of sealants to both surfaces of parts to be sealed.

·Smooth material with small brush.

·Wait about one minute then mate parts together.

·Bolt parts using normal torque specifications.


Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8 to 28C (46 to 82F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container.